1. Testing and Measurement
  2. General Purpose Testers
Fluke
FLUKE-424D Laser Distance Meter
Model No :
FLUKE-424D
Part Code :
4235484

Overview

Feature-rich meter includes tilt sensor for hard-to-reach measurements, corner angle feature and compass

Overview
Feature-rich meter includes tilt sensor for hard-to-reach measurements, corner angle feature and compass
Features
-Measures up to 100 m (330 ft)
-Higher accuracy: +/-1 mm (0.04 in)
-4-line display shows you even more data at a glance
-Inclination sensor assists with height tracking, leveling, and indirect horizontal distance measurements when line-of-sight is blocked by an obstacle
-Corner angle feature, allows you to determine the angle of a corner
-Compass provides a "heading" for your distance measurements
-Stores 20 complete displays for quick recall
-Backlight
-Tripod mode allows you to mount the meter to a tripod when measuring long distances
-Full Pythagoras function for height measurements
-Audible keypad feedback
-Stake Out feature helps you mark out defined lengths such as when constructing wooden frames
-Automated End-piece Correction for measuring from an edge or corner --a built-in sensor detects the position of this bracket and automatically changes the reference point
-Minimum/Maximum function
-Enhanced environmental protection:IP54-rated as dust and water spray resistant
-Improved battery life of 5000 measurements with auto shut-off feature
Electrical Specifications
-Typical Measuring Tolerance: ± 1.0 mm
-Maximum Measuring Tolerance: ± 2.0 mm
-Range at Leica target plate GZM26:100 m / 330 ft
-Typical Range:80 m / 260 ft
-Range at unfavorable condition: 60 m / 195 ft
-Smallest unit displayed: 6 /30 / 60 mm (10 / 50 / 100 m)
-laser point at distances: 6 /30 / 60 mm (10 / 50 / 100 m)
-Measuring tolerance to laser beam: ± 0.2°
-Measuring tolerance to housing: ± 0.2°
-Range: 360°
General Specifications
-Laser class: 2
-Laser type: 635 nm, <1 mW
-Protection class: IP54
-Automatic laser off: After 90 seconds
-Automatic power off: after 180 seconds
-Calibration cycle: Tilt and compass
-Safety: IEC Standard No. 61010-1:2001
: EN60825-1:2007 (Class II)
-EMC: EN 55022:2010
: EN 61000-4-3:2010
: EN 61000-4-8:2010
Brand SKU
FLUKE-424D
Rashi Part SKU
FLUKE-424D
Warranty
3 Years