1. Safety and Security
  2. Fire Alarm System
Morley-IAS
Morley-IAS HM-FHSE-UL Fixec temp-ROR-High Temp Heat Detector
Model No :
HM-FHSE-UL
Part Code :
HM-FHSE-UL

Overview

The HM-FHSE-UL Series
thermal detectors are addressable sensors that use a state of-the-art thermistor sensing circuit for fast response. These sensors provide protection for open areas and can be used with addressable Fire Alarm Control Panels (FACPs).

Features
- Addressable by device
- Rotary, decimal addressing: 1- 159 for models SMX and STX
- Unique single-source, dual-chamber design to respond quickly and dependably to a broad range of fires
- Sleek, low-profile design
- Integral communications and built-in type identification
- Built-in tamper-resistant feature
- Removable cover and insect-resistant screen for simple field cleaning
- Two-wire SLC loop connection
- Unit uses base for wiring
- Direct surface mounting or electrical box mounting
Keywords
NA
Electrical Specifications
NA
General Specifications
- Factory preset at 135°F (57°C) for the HM-FHSE-UL; 190°F (88°C) for the HM-HTSE-UL
- Rate-of-rise triggers at 15°F (8.3°C) per minute for the H355R(A)
- 360-degree viewing angle of the visual alarm indicators. LEDs blink red in Normal condition and steadily illuminate red in Alarm
- Visible LEDs blink every time the unit is addressed
- Size - 2.1" (5.3 cm) high; base determines diameter
- B501: 4.1” (10.4 cm) diameter
- Shipping weight 4.8 oz. (137 g)
- Installation temperature: HM-FHSE-UL, HM-RHSE-UL: –4°F to 100°F (–20°C to 38°C)
- HM-HTSE-UL: –4°F to 150°F (–20°C to 66°C)
- Humidity range 10% to 93% relative humidity (non-condensing)
- Voltage range 15 to 32 VDC peak
- Standby current 300 µA @ 24 VDC (one communication every five seconds with LED blink enabled)
- LED current 6.5 mA @ 24 VDC
- Fixed-temperature setpoint 135°F (57°C) for the HM-FHSE-UL and HM-RHSEUL; 190°F (88°C) for the HM-HTSE-UL
- Rate-of-rise detection Responds to greater than 15°F (8.3°C) per minute
Brand SKU
NA
Rashi Part SKU
NA
Warranty
1 Year