1. Testing and Measurement
  2. Basic Electrical Testers
Fluke
FLUKE-28II-EX Digital Multimeters
Model No :
FLUKE-28II-EX
Part Code :
4017165

Overview

Fluke 28 II Ex Intrinsically Safe True-rms Digital Multimeter

Overview
Fluke 28 II Ex Intrinsically Safe True-rms Digital Multimeter
Features
-
-Intrinsic safety plus regulatory approvals
-A completely sealed, IP67 rated case
-Withstands drops up to 10 feet or 3 meters (with holster)
-Dustproof per IEC60529 IP6x
-Waterproof per IEC60529 IPx7
-Meets IEC Overvoltage Electrical Safety Standard No. 61010-1:2001
-Reversible holster for added protection of the display when not in use
-4-1/2 digit mode for precise measurements (20,000 counts)
-True-rms ac voltage and current for accurate measurement on nonlinear signals
-Measures up to 1000V and 10A ac and dc (note that Ex zones require reduced measurements)
-Low pass filter ensures accurate voltage and frequency measurements on variable speed motor drives (VSDs)
-Frequency to 200 kHz and % duty cycle to help you diagnose VSDs and switching power supplies
-Resistance, continuity and diode test
-10,000 µF capacitance range for components and motor caps
-Conductance measurements for high resistance or leakage tests
-Min/Max-Average and Peak capture to record transients and variations automatically
-Relative mode to remove test lead interference on resistance measurements
-Auto and manual ranging for maximum flexibility
-Input Alert protects you by chirping and flashing “Lead when leads are plugged into the wrong inputs
-Backlit keypad buttons provide extra visibility in poorly lit areas, even when you’re wearing full PPE
-Large display digits and 2-level bright white backlight also increases visibility
-Long battery life – 400 hours typical without backlight (Alkaline)
-Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
-
Part Code
4017165
Electrical Specifications
-DC voltage: 0.1 mV to 1000 V
-AC voltage: 0.1 mV to 1000 V
-DC current: 0.1 µA to 10 A
-AC current: 0.1 µA to 10 A
-Resistance: 50 M Ohm
-Conductance: 60 nS
-Diode Test: 2 V
-Duty Cycle: 0.0 % to 99.9 %
-Display counts: 6000 counts/19,999 counts in high-
General Specifications
-Min/Max/Avg Recording: Display signals up to approximately 100 ms
-Safety Certifications: ATEX, NEC-500, IEXEx, GOST R Ex (Pending)
-Display: LCD, with backlight
-External protection: Rubber holster
-Warranty: Three years
Brand SKU
FLUKE-28II-EX
Rashi Part SKU
FLUKE-28II-EX
Warranty
3 Years