1. Safety and Security
  2. Fire Alarm System
Morley-IAS
Morley-IAS HM-DMMI-UL Addressable Monitor Module, UL-Listed
Model No :
HM/DMMI/UL
Part Code :
HM/DMMI/UL

Overview

Monitor modules supervise a circuit of drycontact input devices, such as conventional heat detectors and pull stations, or to monitor and power two-wire smoke detector circuits.

Features
-Built-in type identification automatically identifies this device as a monitor module to the control panel
- Powered directly by two-wire SLC loop. No additional power required
- High noise (EMF/RFI) immunity
- SEMS screws with clamping plates for easy wiring
- Direct-dial entry of address: 61-99 for models SMX and STX
- LED flashes during normal operation and steadily illuminates to indicate alarm
Keywords
NA
Electrical Specifications
NA
General Specifications
- Nominal operating voltage 15 to 32 VDC
- Maximum current draw 5.0 mA (LED on)
- Average operating current 375 µA (LED flashing), 1 communication every 5 seconds, 47k EOL
- Maximum IDC wiring resistance 1500 Ohms
- Maximum IDC Voltage 11 V EOL resistance 47K Ohms
- Temperature range 32°F to 120°F (0°C to 49°C)
- Humidity range 10% to 93% non-condensing
- Dimensions 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box
Brand SKU
NA
Rashi Part SKU
NA
Warranty
1 Year