Panduit - PUC6004BU-FE - Copper Cable
Model No :
Part Code :


Copper cable, enhanced category 6 UTP, CM, 4-pair, conductors are 23 AWG construction with HDPE insulation, twisted in pairs, separated by an integrated pair divider, and protected by a flame-retardant PVC jacket, blue.

- Cable has been tested as part of the TX6000™ Copper Cabling System by an independent laboratory and complies with the electrical channel requirements of the following standards: ISO/IEC 11801 2nd Edition: 2002,EN 50173-1: 2002, and ANSI/TIA-568-C.2
- Industry leading guaranteed channel performance above the TIA/ISO standards with headroom guarantee
- Separates pairs for exceptional cable performance.Maximizes the amount of signal that reaches the receiver and increases bandwidth.Ensures proper performance and provides quick installation
- Cable has been characterized to 550 MHz, 300 MHz above the standard
- Easy identification of remaining cable reduces installation time and cable scrap

Electrical Specifications
- Certified channel performance in a 4-connector configuration up to 100 meters and exceeds ISO 11801 2nd Edition Class E and ANSI/TIA568-C.2 Category 6 standards at swept frequencies up to 250 MHz
- Certified component performance up to 100 meters and exceeds the component requirement of IEC 61156-5 and ANSI/TIA-568-C.2
- Category 6 component standards at swept frequencies up to 250 MHz
- Conductor/ insulator: 23 AWG solid copper insulated with HDPE
- Flame rating: UL 1685
- PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications
- Installation tension: 110 N (25 lbf) maximum
- Temperature rating: 0°C to 50°C (32°F to 122°F) during installation -20°C to 60°C (-4°F to 140°F) during operation
- Cable jacket: Flame retardant PVC
- Cable diameter: 5.7mm (0.225 in.) nominal
- Cable weight: 11 kg/305m (25 lbs./1000 ft.)
- Packaging: 305m (1000 ft.), Reelex™ packaging Package tested to ISTA Procedure 1A

General Specifications
- Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568-C.2 Category 6 component standards
- The conductors shall be 23 AWG construction with HDPE insulation
- The copper conductors shall be twisted in pairs, with all four pairs separated by a cross-divider and covered by a flame retardant
- PVC jacket

25 Years Performance warranty